3-in-1 Chemicals - Manufacturer & Suppliers in Mumbai, India for Metal Pretreatment
3-in-1 Chemicals Manufacturer & Suppliers in Mumbai, India – Mahavir Chemicals offers excellent quality of 3-in-1 Chemical . Our wide range of metal degreaser is very effective in removing any type of oil.
M.Chem Degreaser removes heavy oil such as Cutting Oil, Lubricating Oil, Lapping Oil, Coolant Oil, Grease, Dirt, etc. from any metal surface or component very easily and quickly.
Our Metal Degreasers are safe and Biodegradable. M.Chem Degreasing chemicals are ready to use for any Metal surface Pre-Treatment.
we provide expert guidance and complete support to ensure a smooth and successful setup of the plant
Factors Taken into Consideration While Purchasing 3-in-1 chemicals from Mnufacturer & Suppliers :
There are a number of other factors that can have a big impact on performance and safety:
1) Flammability : .
Degreasers often contain very flammable alcohols and hydrocarbon solvents. They can be cheap and effective, but can dangerous without proper ventilation, or around open flames, sparks (e.g. welding), or hot surfaces. Nonflammable degreasers avoid these safety issues, but are generally more expensive. Some nonflammable cleaners can be very toxic, containing hazardous solvents like Perchloroethylene, trichloroethylene or n-propyl bromide. High flashpoint (often called “high flash”) solvents have vapors that are less likely to combust in normal ambient temperatures (say below 140°F/60°C).
2)Dielectric strength : .
If you plan to powered equipment, or need to switch it on before the solvent has flashed off, consider a degreaser with a high dielectric strength. Make sure you know the amperage and voltage of the circuits you are trying to clean before spraying anything onto the circuits, and evaluate the suitability of any cleaner in your application. Dielectric strength is the maximum electric field that the material can withstand before its insulating properties break down. The lower the dielectric strength, the more likely it will breakdown and allow electricity to flow through it and short out.
3)Plastic / rubber compatibility: .
More care needs to be taken when cleaning plastic packaging, plastic components, rubber gaskets and seals. If the degreaser is incompatible with the plastic, it can craze (create small cracks), embrittle, or soften the material. Rubber seals may swell, shrink, or dissolve if exposed to a harsh solvent. A new degreaser should always be tested before being used extensively.
4)Toxicity : .
N-Propyl Bromide (nPB), Trichloroethylene (TCE) and Perchloroethylene (Perc) are highly toxic chemicals commonly used in degreasers to provide cleaning performance in a nonflammable formula. There are documented court cases where workers suffered major health effects when exposed to high levels of these chemicals. Workers reported headaches, dizziness, and even loss of full body control. There are also possible links to reproductive problems and cancer. All of this has caused maintenance facilities to reconsider their solvent choices, especially with manual cleaning when exposure tends to be higher.
5)Environmental issues : .
Volatile organic compounds (VOCs), solvents that add to smog, or solvents with high global warming potential (GWP) have been a focus of a number of regulators. Some state (e.g. CARB or California Air Review Board), municipal, and even industry-specific regulations restrict the use of high VOC or high GWP materials.
